Détecteur des fuites d'eau AQUAPHON A100

Complete case with all microphones In the event of a leak in a pressurized pipeline, water flows at high speed through the break and penetrates the ground. The material of the pipes vibrates at the point of exit. The pipe transmits these vibrations, which can be detected at remote contact points, such as the valves. The AQUAPHON A100 allows you to hear this noise. The earth also vibrates due to the water jet and near the leak, influenced by the pipe. These vibrations travel to the surface of the ground, where they can be perceived as sounds. Pre-localization with the contact tip: In metal pipes, the sound wave of the leak is transmitted extremely well over a long distance. The contact tip is particularly well-suited for pre-localization on this type of pipeline. Localization using the ground microphone: For non-metallic materials, the sound wave is attenuated more quickly. As a general rule, listening at the access points (valve square) to the pipeline with the contact tip is insufficient. The ground microphone allows listening on the ground above the pipeline. Step-by-step listening on the surface of the ground helps to precisely locate the leak. The AQUAPHON A100 provides a precise visual comparison of the noise intensity at different locations. Does the sound level increase or decrease? What is the trend? The LCD display helps beginners or less experienced users answer these questions. Specifications: Battery capacity: 2.6 Ah Operating duration: 4 to 6 hours Thickness: 4.5 cm Height: 23.5 cm Width: 10 cm Operating temperature range: -20°C to +50°C Weight: 695 g Detection range: 6 to 600 m Battery recharge time: 3 hours Battery voltage: 7.4 V